'Loot' from Drums at the Rapids 2025 (mostly from RRB Minis & More)

    One of the prizes I won from RRB Minis & More - a very cool 3-D printed multistory urban building

I ran my Viking Raid game at Drums at the Rapids, but I was the one coming home with the loot! Normally, there were only a couple vendors at Drums, so I didn't really expect to come how with a lot of new stuff. However, I did take items to sell in the flea market at Fort Meigs. I did very well and sold most of what I took up -- more than enough to pay for my hotel, meals, and purchases. But even more significantly, most of what I was bringing home were prizes from RRB Minis & More. Owner Rich Brown had run a contest for scenarios for any of the rules sets he carries. Mine was the winner (my campaign rules for Zombie RV, which are a free download on his site). When he first told me that I won, I was surprised...even more so when I saw home much he gave me!

    The rear of the building -- I love the door upstairs to the rooftop...great sniper position for games!

As I said, Rich was very generous. He gifted me a huge amount of 3-D printed stuff from a new line he is carrying. It is all from the Kickstarter 20th Century Urban Environment. Check out the link -- this is some great stuff! If you like anything you see, feel free to contact him so he can print it out for you. Some of it was exactly what I was looking for. A few things I already have, but still, this was a very generous prize. The centerpiece was a multistory building with attached garage (I think it is meant to be attached, but it could also be a separate building). The doors open, roofs come off, and it is all very modular. I know I probably have enough urban buildings for now, but I'm going to be hard pressed to resist getting this one painted up and ready for the tabletop. I think my favorite part is the second story door leading to the flat rooftop with parapet. I can see this being a favorite "sniper position" in games using the building. It also game with some ladders which I will likely attach on the outside as a fire escape or another way up onto the roof. 

    The one story garage which I believe is made to be attached to the multistory building

The garage looks very much like a building you would see in an urban area. Maybe it is a "hole in the wall" automobile repair shop? I might paint it up that way. The garage could just as easily stand alone as its own building. It is modeled partially damaged on its sides, which gives it more versatility. If you sandwich it between two other intact buildings, though, you will never see the damage. Standing alone, it is a damaged building - perfect for post-apocalyptic or a city in ruins. One building, two uses. Although I will paint it up separately from the multistory building, it will be in a similar style so that it can be attached, if I choose. 

    The rear of the garage -- if you look through the left window, you can see the damaged side

The things I was really excited about when Rich showed me this kickstarter last year were the rooftop scatter items. The water tank, air conditioning ducts, skylights, and even doorway to the rooftop are all very generic and very useful. I had actually been looking for these types of items, so when Rich shared the Kickstarter website with me, they were the first thing I asked about. Likely, they will be the first things painted up, too. They should fit on any flat roofed building, which most of my Sarissa Precision city buildings are, thankfully. They should also paint up fairly quickly, too. I look forward to getting them finished and onto the tabletop in my next game of Mean Streets gang warfare or Zombie RV.

    3-D printed air conditioning ducts, skylights, water tank, etc., available from RRB Minis & More

If you have seen my games, you may have noticed that I don't have any stoplights in my urban setup. Initially, I had been going back and forth about how to scratch-build them. However, since then, I have picked up a couple varieties. Rich's prizes add in a third variety. I will have to set all three out and decided which ones I like better. One selling point for Rich's will be that I should be able to order as many as I want from him. I like the street lights, too -- a somewhat ornate, elongated globe. Very fancy! Of course, I would need a LOT more than two to replace my dozen or so scratch-built ones that I made a few years ago. The Stop, Yield, etc. signs are nice and will be useful, as well, as is the phone box. I already have a lot of plaster traffic cones already painted up, so I will likely not spend time on these soon. I'm not sure what the black cylindrical items are...they look familiar, but their purpose on a street is eluding me right now.

    Street scatter that Rich included in my gift box -- traffic lights & signs, streetlights, & even cones!

Rich also included some other trash -- literally! I love the collection of three garbage bags. I also like the dumpster with the separate working lids. The sawhorses are nice, as well, as are the barrels, trash cans, and even barrel fire. I already have some of these items painted up (same with the fire hydrants), but the manole covers or sewer access points are new to me and a great idea to paint up and throw onto a street on the tabletop for that little bit "extra." That's the awesome thing about scatter terrain like this. It makes your tabletop come alive. It is those little extras that draw people in and make them want to play a game on your tabletop. I highly recommend picking up some of this inexpensive scatter to take your display to the next level. 

    The goodies keep on coming -- love the collection of garbage bags, dumpster, and sawhorses!

Can you believe I'm still not done with what Rich included in the gift box? I was excited to see the three wooden pallets. I almost bought some at Cincycon this past March from A Critical Hit. However, my tub was already pretty full, so I decided to be frugal. Yes, I could make pallets with bass wood. Why, though? For a wargamer, time is money, too. These will take next to no time to get onto the table. Plus, they will be far less fiddly than cutting pieces of bass wood, arranging them, and gluing them together. I'll happily spend a small amount for 3-D printed ones. Along with the traffic lights, they will likely be my first order of additional stuff from the samples he sent me. The park bench is nice, as is the dead tree (it will join my growing dead forest). I have to admit that I have no idea what the four tiny red things are...hopefully Rich Brown will see my post and comment on what they are supposed to be. The brick rubble is good -- post-apocalyptic gamers can always use more rubble!

    Pallets! I regretted not buying these from A Critical Hit at Cincycon...now I have a source for them

I actually did buy some things from RRB Minis & More, too. He didn't bring his store, but did bring along some stuff to add in the flea market. GMs attending Drums at the Rapids are encouraged to bring flea market items to set on one of the tables or shelves along the outer wall of the main gaming area. I've been doing it for years, so I was glad to see Rich brought some things I could purchase to pay him back some. I bought printed copies of three of the rules sets he carries. I already had the PDF of Mice-at-Arms, but always like having a printed copy when I play a game. I had been meaning to download Frogs of the Fen (supplement to go along with the rules), but hadn't gotten around to it. Rich has been running his Sci-Fi rules, Fictioneers: Legacy Fantastic Sci-Fi Warriors rules for a few years at various conventions. My friends who have played them all have enjoyed the games, so I figured I would pick them up.

Rich told me he wasn't aware he could have brought his store and been a vendor. Doug of the Colby Street Irregulars usually recruits a couple for each show. So, there was a communication breakdown there, as I'm sure others would liked to have picked up some stuff from RRB Minis & More. The one vendor who was there were my friends James & Rusty from Fireland Games. They brought their collection of Saga, Bolt Action, and more figures, as well as various other items. One thing that they do that is a great service for gamers is they open up the plastic boxes and sell individual sprues. Sometimes, you don't need 30 of a figure type and five or six fit your needs perfectly. James says it has been a successful marketing strategy for them.

    Picture from the Gripping Beast website of one of the two trolls I bought from Fireland Games

Readers of my blog know I actually prefer metal miniatures, but am willing to paint plastic or 3-D printed figures, too. When I saw these 28mm metal trolls from Gripping Beast online, I knew I wanted to have a couple. I asked James at DayCon if they could get them and he said yes, and ordered the two for me. So, my purchase form Fireland Games was already "set" when I arrived. I am looking forward to the second edition of Dragon Rampant to be released in October. Fireland Games will be ordering me a copy (contact them if you want one, too). Our Sunday night gaming group enjoys the Rampant series of games. They are quick, easy-to-learn, and provide a great multiplayer game that can be finished in a couple hours. Just to give you an idea how quickly the system moves, my friend John L (owner of JS Wargamer Printing) recently ran a six player Xenos Rampant game (the Sci-Fi version). Each player controlled 40-50 points ("normal" size is 25) and it finished in a little more than two hours. If you haven't played any of the Rampant games, I highly recommend them!

    Meet my second 28mm Gripping Beast troll I got from Fireland Games -- his name is Gorka

I am telling everyone that 28mm Fantasy will be next year's project. My 28mm Vietnam is this year's, and I am adamant about not making a major purchase to start a new one before next year. Two trolls are not a major purchase. And um...neither is the box of Gripping Beast metal Orcs I'll buy when Fireland Games puts in their next Gripping Beast order. Nope, nope -- no new project! "Move along, folks, nothing to see here...!" The final picture is of three cups worth of Hirst Arts plaster pieces that Rusty brought along to get out of his basement (his wife's instructions). He wanted to give me everything he brought, which would have been about 50 of these cup's worth -- not just the three I filled up. I did not need that much, though, but there were some pieces I could use. Rusty refused to accept money for them, which just goes to show how good of guys they are (or how much he wanted to get rid of it all...ha, ha!).

    My three cups worth of Hirst Arts plaster blocks -- the doors were nice, and I can always use stone

So, how do I count all of this to add to my tallies, below? The two buildings are easy -- they're "Terrain." The scatter...wow. Do I really count each individual traffic cone? That seems excessive. And I certainlyi can't count each Hirst Arts block! Maybe the traffic cones should count those as one, to quote Gimli the Dwarf? Either way, I'm about to go seriously in the "red" on my Scatter counts of Painted vs. Acquired. And I was doing sooo well!! Luckily, I am catching up on miniatures as my Vietnam figures are going quickly. Still, it is only May. I have more than seven months to make up these totals! And who can look an amazing gift horse in the mouth, like what Rich gave me? Still, I think I need to start working some of these scatter pieces in fairly quickly...!

MINIATURES Acquired vs. Painted Tally for 2025

• Miniatures acquired in 2025: 145
  
• Miniatures painted in 2025: 85 

TERRAIN Acquired vs. Painted Tally for 2025

• Terrain acquired in 2025: 21
  
• Terrain painted in 2025: 23

SCATTER Acquired vs. Painted Tally for 2025

• Scatter acquired in 2025: 93
  
• Scatter painted in 2025: 60